All-Purpose V-Cut PCB Separator/Separator cut FR4 PCB

1.Straight Knife PCB separator machine 2.Pneumatically driven&electric control 3.can cut all kind of PCB. 4.hight quality

All-purpose V-CUT PCB Separator SM-4000

 

Straight Knife PCB separator machine- Pneumatically driven and electric control

The machine is pneumatically driven and electric control. The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress. Evensensitive SMD-components like ceramic capacitors will not be damaged by the separate process. Due to the special design of the knives also boards with high components placed close to the edges can be separated safely. Based on a proven method of separating, wedge-shaped knives are used to cut the panels within the groove. This enables boards of less than 1 mm thickness to be separated safely and without creating stress.

Features

1, No vibration during the process to prevent damage to precise PCB2,Gap for insertion of the board can easily be adjusted by means of the adjusting knob in the top side of the machine, low friction design is applied.

3,Lower knife height adjustable, the front and real portion can be adjusted separately. No thin plates are required after re-sharpening the knife. 

4,Operation and maintenance can be done also by unskilled personnel

Specification:

Specification

Power Voltage:                  90~240VAC

Air pressure:                    5Kgs/cm2

Output :                       12.5 ton(Gross)

Part-Up height:                      39mm (max)

Part-Down height :                  19mm (max)

Effective length:                 350mm,

PCB thickness:                 0.1mm~1.0mm (without v-grooved )

Weight :                         170kg

Up blade:                        350mm(L)*58mm(W)*7mm(T)

Down blade:                      360mm(L)*39mm(W)*7mm(T)

cut running:                     350mm

protect times :                   200000 times ,can abrade 3-4 times 

Machine dimension:                   500mm*650mm*1050mm

Test point  V-cut =5mm

Test point V-cut <5mm

All-Purpose V-Cut PCB Separator/Separator cut FR4 PCB